1 / 3
Bat System for 330mm Wheel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits 2 decagon inserts: 125mm radius, 60mm radius
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 75
- Makes
- 0
- Views
- 709
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The smaller insert nests inside the larger.
Printed in eSun PLA+
0.2mm layer height
3 walls
3 layer top and bottom shell
30% tri-hexagon infill
(Tried with gyroid infill, however my auxiliary cooling fan over cooled an area due to the long layer time, so I lowered the aux fan speed from 70% to 50% and changed it to tri-hexagon.)
332g of PLA to print the whole set.
(Still unsure whether these large flat prints are better designed as blocks filled with slicer infill or, alternatively, as a top surface with a thick frame pattern making up the body.