N6ARA Morse Paddle (Plug Model) Case
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.40 – €0.49 net (excluding VAT)
For file: N6ARA-Plug-Case-rev1.3_0.2mm_PETG_MK3S_37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.44 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 37.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A case for the N6ARA morse paddle (plug model) and the adjuster.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 40
- Makes
- 0
- Views
- 517
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case that houses the N6ARA Morse Code Paddle (The plug model) and the adjuster that comes with it. The clearances are so that both the key and the adjuster should hold in place with friction. You will most like need to do a little cleanup of the groove from the circuit board along with the inner opening for the adjuster after printing.