Eryone Thinker SE BTT SKR Mini E3 V3 mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your BigTreeTech SKR Mini E3 V3 on your Eryone Thinker SE using this simple part
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
After swapping the original board of my Eryone Thinker SE with an SKR Mini E3 V3 I found myself in need of mounting it. This model allows placing the new board on the same location of the old board, but removes the ability of reinstalling the front aluminum plate (which is not a big deal as I have never gotten any debris on the board.
Use a high infill (40%) to make the four pillars more robust.
Route the cables as follows:
- everything that goes to the toolhead goes between the left pillars
- lcd connector and power cable goes in the front
- usb cable comes out of the back
- everything else goes between the right pillars
you don't need fans as it's an open air design, if your cables are too long ensure that they don't catch in the bed v-wheel
BOM:
- 4 M3x8mm bolts to secure the board to the bottom plate
- 4 M3x6mm bolts + 4 M3 T-nut to mount the plate to the extrusions