1 / 2
HeroQuest card dashboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Card holder for HeroQuest or other games. For 63mm x 88mm cards. Main hero with 2 top slots and 11 side slots each side.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 239
- Makes
- 0
- Views
- 1,748
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Share Alike
The model is split into two parts, so it can be printed without support or overhangs. I would recommend printing it with the grooves facing upward (orientation like in the stl itself) and use some plastic glue to connect the bottom part.
The Bottom part allows you to safely lift this dashboard from the table without any cards falling out (don't move the dashboard too fast though, the “grip” on the cards is not that firm),
while the internal grooves make it easy to flip through the cards.