Noha pro vysoušeč bot Orava SW-471
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.57 – €4.36 net (excluding VAT)
For file: Noha vysousec bot Orava SW-471_0.2mm_Prusament_PETG_MK3S_4h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.96 excluding VAT (range midpoint).
- Weight reported by the author
- 45 g
- Print time reported by the author
- 4.33 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Náhradní díl za zlomený
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Náhradní díl-noha pro vysoušeč bot Orava SW-471
Orava SW-471 Shoe dryer Leg
🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽
! Zjistil jsem,že PETG nevydrží teplotu jakou vysoušeč hřeje 🙂 snad vydrží ASA…vyzkouším a podám hlášení
!Don't print with PETG. Dryer Is too hot. I can try ASA.
🔼🔼🔼🔼🔼🔼🔼🔼🔼🔼🔼🔼🔼🔼
Nastavení doporučuji 3 perimetry, 10% výplň a zapnuté podpěry
Settings recomending 3 perimeters, 10% infill and supports on
Montáž/assamble: 4x imbus šroub/screw M3x12