HSW Sony E-Mount lense holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Honeycomb storage wall for Sony E-Mount lenses
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 92
- Makes
- 1
- Views
- 752
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to make a honeycomb storage wall for my camera gear so I designed this.
You have a labeled SONY E-MOUNT and without label.
- FE 4 70-200m G OSS holder ( Lower extra support + E-Mount + tripod adapter insert)
- Smaller lenses (the lower support is optional)
I also made sure to mark the entry point of the lense so its facing you!
If you print the lower support for heavier lenses, make sure you print it like this so you don't need supports:
The FE 4 70-200m G OSS is longer to be able to insert from the bottom the tripod adapter of the lense to your HSW wall. Once the tripod adapter is in, screw the lense into the E-Mount system.
Depending on your printer, you might need to use supports on the E-Mount:
I used PETG at 0.2 with 35% cubic infill and 4 layers.
Check my other designs!
https://www.printables.com/@caste1200_408745/collections/1048664