Nitrile Glove Box Wall Mount

This is a simple wallmount designed to fit up to 3XL Glove Boxes and only two screws are required to hold it up. There are 4 screw holes if you want to throw a couple extra just in case.

Note

• Designed for #6 wood screws, up to (7.25mm Head, 3.3mm Shaft, 80°).
• The internal dimensions allow boxes up to 77.5mm x 135mm x (Any Reasonable Length)
• If you have spaghetti detection of some form, it tends not to like these large hex patterned models.

Printing Recommendations

• Can be printed without supports or brim
• Possible problems with stringing if your filament is wet
  • Recommend using a heat gun to remove strings

Model Adjustments

To make larger boxes you can either scale the .step/.stl but for major changes or making it smaller, I would recommend just directly editing the fusion file. If you don't want to manually change the files, try Peter Davis's Models for Small to XL boxes.