Pet Puzzle/Maze (Version 2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A interactive puzzle for your pet (Dog/Cat). A maze where you can set different obstacles to make it more challenging.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 57
- Makes
- 0
- Views
- 1,085
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A “maze puzzle” for your pet.
You put a treat in the container (hat), place it in the “track” and watch your loved ones trying to get hold of it. Once they have mastered the “maze” you can increase the difficulty by adding one or more “obstacles” in the course.
I “only” have a Mini so the track has been sized to max out space.
I printed it in PETG with a layer height of 0.2
Most likely you want to put some “rubber feet” underneath the track to keep it stable on the floor.
Print Instructions.
You need to print the following:
Minimum:
- One (1) track of your choosing (difference between them is that PetMaze Track V2-2 allows you to put more obstacles in the track).
- One (1) “Hat”
Extras:
- Gates the track is designed for using up to 4 gates at a time but in theory you could add up to 8.
Depending on the tolerance of your printer you may wish to scale this one to 101% or more. The original works perfect on my Mini. - Additional obstacles. If you use PetMaze Track V2-2 you can add extra obstacles of your choosing (Bone 1, Bone 2 and/or Paw)
- Gate Cap. Should the gates not be snug enough around the poles, i.e. too loose, you could put a cap on top of the “gate pole” with a bit of glue.