Bontrager Helmetplate for action camera & Ledlenser MH5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This plate clips to the Bontrager bicycle helmet. The top fixture matches GoPro camera fixtures.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print it on its side to get the clips stronger, using support everywhere. Filament ASA and layer thickness 0.20mm. I used nozzle size 0.4mm. I have a separate file for matching fixture for a Ledlenser MH5 light with flex-brake-bad, an camera attachment for SonyAS3 action cameras. Probably loads of additional options available here on Printables.
The G-code file is for PrusaMini using ASA, printed in it's side.
The plate clips to the top middle of the Bontrager helmet, an area which is 41mm long, 28mm wide. The claws opens by pressing the leavers, and they extend about 11mm downwards.
Revisions: Added a drop in for a nut. Either printed or bought nut. Compared to a wing nut a dropped and fixed nut saves a hand when tightening. Added an extended bolt for easier access and twist. The bolt can be used with a 4mm Allen or Hex key too. Print the threaded parts with a lower layer height to get it smooth and cleaner.