1 / 2
Pencil Pen Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nice storage box for coloring pencils - or anything that fits inside
- Rating
- 5 / 5
- Likes
- 110
- Downloads
- 328
- Makes
- 16
- Views
- 1,609
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
This is a remix of Lyryln's Big Pen Box - only smaller :)
I scaled it down to 75% which saves a ton of print time plus seems sufficient for most school or kindergarten color pencil needs.
The other amendments are:
- combined the "metal" and the body part into one, multicolor is achieved by a simple color change at 61.6 mm / layer 308 (check in your slicer - the values given apply to 0.2mm layer height in PrusaSlicer)
- combined "Wood" and "Mine" sections into one, again - multicolor achieved through a color change at 50mm / layer 250 ( plus/minus, depending on the mine thickness you want to achieve)
- NoGlue construction - tip and body are held together by ball snap joints, just push in with some force (make sure the ball joints are properly aligned before you push!)
- and, yes, the thread is more conventional right-handed now :)
Supports are only needed for the arc overhangs on the “tip” model
Thank you Lyryln for the idea and the models, great work (just too great -literally- for my needs)