Simple Amiibo Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple Amiibo stand that does not use much filament and has rods to connect another Amiibo base above.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 82
- Makes
- 0
- Views
- 556
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
This is a simple Amiibo stand that is useful for anyone trying to save filament or if you have a lot of Amiibo figures and need a simple base to print for all of them. This design, like my other Amiibo display stand allows stands to be stacked on one another. This design is simpler and uses rods in order to support another base to be placed on top. There are four holes in the Amiibo stand base on the top side and the bottom side for a rod to be placed in each hole. The gcode files are slightly larger than the STL files as the STL files may be a bit tight for an Amiibo base. Use the gcode files if you want the space between your Amiibo's base and the Amiibo stand to be less tight.