4.2" ePaper frame with space for a large battery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frame is compatible with 4.2" Waveshare and Good displays. It has a 70 degree angle base and room for a large battery.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 59
- Makes
- 3
- Views
- 577
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I really like MultiTricker's work and a project called zivyobraz.eu. But for my 4.2" ePaper display I only had a 5000 mAh battery lying around. So I used my trusty onShape and I redesigned original frame a "little". :) And while I was modifying it, I also added a stand at a 70% angle to improve readability if the display is laid on a table, which is my use case.
Recommended settings
Material: It's up to you, I used ASA
Layer height: 0.16 / 0.20
Perimeters: 4
Infill: 25-40%
Infill Type: Gyroid (or something similarly strong)
Supports: They are not needed. But I used one in the charging hole. Just in case.
WARNING
If you print the frame from PLA or PET-G, you don't need to make any change and 100% scale will be ideal for a nice tight fit for ePaper display. But if you print the frame from ASA, ABS or other materials that shrink slightly after cooling. Use a scale of 100.30% (or bigger) in X and Y axis (I don't recommend it in Z axis). And don't ask me how I know. :(
Frame is designed for the newer version of the LaskaKit board.