1 / 1
cable grommet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 50mm cable grommet, to be mounted on a 5mm, 9mm, 15mm, 18mm or 21 mm thick plywood.
- Rating
- 4.667 / 5
- Likes
- 43
- Downloads
- 185
- Makes
- 3
- Views
- 1,092
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
A simple, easy to print cable grommet, meant for European standard (metric system, plywood standard thickness)
- The mounting holes are meant for M3 Allen head bolts
- The mounting holes are on a circle of 56mm diameter, 120 degrees angle between each other
- The grommet should fit inside a 50mm hole, not including tolerance.
- The grommet have a 70mm outer diameter
- The grommet is meant to be mounted on a 5mm, 9mm, 15mm, 18mm, 21mm thick stock
Printing instructions
- The tube and the outer cap are printed together with no support. In your slicer, import the tube and the outer cap STL files.
- If your slicer recenter the outer cap using its bounding box, it will not be properly placed relative to the tube. Shift the outer cap by 5.625mm on the Y axis to center it perfectly relatively to the tube
- The inner cap is printed separately, no support required
- Snap fit the inner cap inside the tube