SAAB 9-3 Shift Knob (98-03)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement shift knob for manual Saab 9-3s. Goes over white plastic knob connected to the shift stick
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 80
- Makes
- 0
- Views
- 818
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
The outside cover fell off my shifter. and OEM replacements are impossible to find, or cost an arm and a leg. So I made this knob to go over the white plastic knob that is press fit on to the shift stick. My OG9-3 is a '99. Im assuming that it will fit the rest of the first gen 9-3s (98-03), but not 100%
On that white plastic knob thing, there was a small triangle that protruded up; I ground mine down with a dremel to make the top face flat. That is not a requirement, just something I thought would make this easier to model.
This has a 5 speed shift pattern on the face.
Does not interfere with the reverse collar.
I made mine with PLA and ive had it on for little over year with no problems. PETG may be a better material for the UV resistance, but PLA doesnt seem to be a bad choice either
The small tab that holds this in place is the weak part of this design. The tab will snap off when I try to remove the shift knob. So once it's on, leave it on.
I know my target audience is extremely narrow, but to the few that this does help: I love you ;)