Kitsure Dish Drying Risers
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.62 – €1.98 net (excluding VAT)
For file: Kitsure_DryingRackFeet_qty_4_0.4n_0.2mm_PLA_MK4IS_1h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.80 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 1.58 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A riser for a Kitsure Dish Drying Rack. Needs a small lift for a drop-in sink.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This was a quick model I made to help elevate/raise/lift a dish drying rack over a drop in sink. The original design of the dish drying rack by Kitsure assumes that your sink is undermount and/or flush to the surface it's resting upon. In our case - as in the pictures included - we have a drop in sink that has about a 12mm lip. This model elevates the Kitsure drying rack up 15mm to get over that lip and will probably work for most drop in sinks.
Link to the Kitsure Drying Rack