1 / 10
Schwibbogen mit Seiffener Kirche / Candle arch with Seiffen church — image 1
1 / 10

Schwibbogen mit Seiffener Kirche / Candle arch with Seiffen church

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.74 – €0.90 net (excluding VAT)

For file: Schwibbogen_Seiffen_0.2mm_PLA_MK3S_56m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.82 excluding VAT (range midpoint).

Weight reported by the author
8 g
Print time reported by the author
55.8 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Schwibbogen mit der Seiffener-Bergkirche mit Kurrende Figuren

Rating
5 / 5
Likes
30
Downloads
295
Makes
1
Views
1,386
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Schwibbogen mit der Seiffener-Bergkirche mit Kurrende Figuren. Modell ist von mir selbst entworfen und mit Fussion 360 erstellt. Es wird noch eine 10er LED Mini Lichterkette  für die Beleuchtung, Kleber und etwas Geduld benötigt. Ich habe diese Lichterkette verwendet und damit funktioniert es ganz gut, es gibt aber bestimmt noch andere Varianten, sie sollte aber nicht größer sein.

Gedruckt auf einem Prusa i3 MK3S+ mit PLA, einer 0,4mm Düse, 0,2mm Schichthöhe und ohne Stützen. Die gesamte Druckzeit aller 3 Teile beträgt ca. 3 h 14 min

Ein weiteres Motiv mit Wartburg und Trabant mit Leipzig Silhouette ist hier zufinden.

https://www.printables.com/model/1108903-schwibbogen-trabant-und-wartburg

Eine schöne Adventszeit und viel Spaß beim Duck, über eine Rückmeldung würde ich mich freuen.

________________________________________________________________________________________________________________

 

Candle arch with the Seiffener mountain church with caroling figures. Model is designed by myself and created with Fussion 360. You still need a 10 LED mini light chain for lighting, glue and a little patience. I used this fairy light and it works quite well, but there are probably other versions, but it shouldn't be bigger.

Printed on a Prusa i3 MK3S+ with PLA, a 0.4mm nozzle, 0.2mm layer height and no supports. The total printing time of all 3 parts is approx. 3 hours 14 minutes

Have a nice Advent season and have fun at Duck, I would be happy to hear your feedback.

 

Tags