Apple shaped smartphone charging station
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€12.59 – €15.39 net (excluding VAT)
For file: A_Charging_Station_v1_0.2mm_PLA+_218C_Retra6-60_OrgSupp_15h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €13.99 excluding VAT (range midpoint).
- Weight reported by the author
- 142 g
- Print time reported by the author
- 15.58 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Charging station shaped as a famous apple. Smartphone stands at an angle of 20° so that it serves as an alarm clock.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 231
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Design:
Apple-shaped charging station that holds a wireless round charger for smartphones. Phone stands horizontal at an angle of 20° so that it can serve as an alarm clock close to your bed.
Designed for my iPhone 12 Mini and my Yootech charger but it works with bigger smartphones of any brand as long as they are compatible with the charger you want to fit in the station.
Uploaded additional specific model for large smartphones, as iPhone 14 plus.
An adapter to fit an Apple Magsafe charger in the provision is also provided. For other wireless chargers you will need a specific adapter designed and made. If you need any help, send me a message with dimensions and I will create one for you.
Design software: FreeCAD
Dimensions: envelope X: 140 mm, Y: 125 mm, Z: 157 mm
Printing Details:
Printer: Prusa MINI+
Material: PLA+, printed at 218°C (best compromise for my printer and settings)
Infill: 40%
Nozzle: 0.4mm
Layer Height: 0.2mm (Quality on the Prusa MINI+)
Supports: Yes, detachable organic support
Assembly:
Print Only. You can use a few small pieces of Patafix between the wireless charger and the printed body so that it does not move and it raises towards the phone for the best contact.
Enjoy!