1 / 4
Brackets for STAR-MOUNT Flat Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets for "Star-Mount Flat Mount pro with RJ45" and low profile
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 72
- Makes
- 0
- Views
- 990
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Brackets to securely mount the “Star-Mount flat mount” on the roof of a car / truck and still be able to remove the dish.
- Print in ASA (or ABS / PETG, not PLA)
- Layer height should be something between 0.26mm and 0.32mm
- ≥ 30% infill, 4-5 walls. The top "clamp" should be solid
- Use SIKA (available in black, grey and white) to glue the brackets to the roof.
- There are indentions in the clamp where the original screws of the Starmount are.
Needed material:
- ASA for the print
- 4 x 4 (=16) M6x30 screws. Manually tap the modelled M6 threads, so that the screws sit tight, no Loctite needed. The screws are intentionally long in case of layer delamination.
- SIKA 11FC or 251 to glue the brackets to the roof
Tested with “Star-Mount Flatmount pro with Rj45”, which is 31mm high. The normal “Starmounrt flatmount low profile” has the same height, so it should fit.