Lethal Company Bolt With 3D Printed Joiner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lethal Company Bolt With 3D Printed Joiner To Ease Assembly & Disassembly
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 151
- Makes
- 1
- Views
- 961
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
Great original mode, but for everyone not living in America, we cant access imperial screws. This was designed to use a 3D printed thread section, which can be glued or left as is so the screw can be assembled and disassembled. The maximum bridge of this print is only like 30mm, so should be easily doable with most printers, and the threaded section is 5mm short to give some clearance in case there is some drooping on the roof of the threads. Likewise, the internal threads are 30.5mm metric, whereas the external threads of the joiner section are 30mm Metric, so it provides some clearance.