G-Scale 1:29 20 Axle Schnabel Railcar with Load Deck ^ Tank Load
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
G-Scale 1:29 20 Axle Schnabel Railcar with Load Deck ^ Tank Load
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 156
- Makes
- 0
- Views
- 1,103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Public Domain
G-Scale 1:29 20 Axle Schnabel Railcar with Load Deck & Tank Load - I'm not very good at writing directions but everything should be self-explanatory on how it goes together! I used ¾" x 1 ½" white PVC water pipe to glue the two large halves together. I used 4" white PVC water pipe to make the tank cylinder, mine was 36" long but you can vary the length on your design. I used 7mm aluminum rod to connect the load deck platforms together and I used ¼" steel rod at the front to strengthen the ends (although I did still have slight bending in the deck end stops). Hopefully you can figure out what hardware to use from screws to the bolts. I also used 1/16" aluminum rod for the safety railings you can bend with the included jig. I also used 1/16" stainless steel welding rod that goes along the stake pockets of the load deck. This is also made to take Kadee 906 body mount couplers and steel wheels. I had to squeeze the wheels together and bevel out where the axles go in for a better fit, you may have to adjust as needed!
You can email me any questions and I will respond asap! Thank you for looking!