7.5" ePaper frame with angled base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frame is compatible with 7.5" Waveshare and Good displays. It has a 70 degree angle for better readability on the table.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 60
- Makes
- 1
- Views
- 717
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I really like MultiTricker's work and a project called zivyobraz.eu. But I wanted to put the display on a table and use it instead of a weather station. So I used my trusty onShape and I redesigned original frame a "little". :) The base has an angle of 70 degrees and allows better readability in this position.
Recommended settings
Material: It's up to you, I used ASA
Layer height: 0.16 / 0.20
Perimeters: 4
Infill: 25-40%
Infill Type: Gyroid (or something similarly strong)
Supports: Only in the corners of the back piece.
WARNING
If you print the frame from PLA or PET-G, you don't need to make any change and 100% scale will be ideal for a nice tight fit for ePaper display. But if you print the frame from ASA, ABS or other materials that shrink slightly after cooling. Use a scale of 100.30% (or bigger) in X and Y axis (I don't recommend it in Z axis).
Frame is designed for the newer version of the LaskaKit board.