1 / 4
Kingston USB memory - disassembly key
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
If you just like me, use a lot your Kingston memory. After some time pads will wear out, and then you can disassembly flash drive and clean pads or place a thin layer of solder.
PLA can be too weak, prefers to use PETG
IMPORTANT!
make sure and remember which side you open flash memory. You can't put memory again in other side.