Yet another "Yet another Nextruder Nozzle Box"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box for 3 (or variable number of) nextruder nozzles with a simple slide mechanism
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 47
- Makes
- 4
- Views
- 611
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
As I wanted a nextruder nozzle box with just 3 nozzles, I recreated the popular “Yet another Nextruder Nozzle Box” in openSCAD with a slightly different opening mechanism and a variable number of nozzles. It uses the same inlets as in https://www.printables.com/model/552879-yet-another-nextruder-nozzle-box or https://www.printables.com/model/563637-nextruder-nozzle-box-mini
I suggest printing at least the lid with a .25mm nozzle and .12mm layer height because of the text. The generated STL's of the lid are optimized for that layer height. The box itself can be printed a bit coarser, e.g. with .15mm layer height. You may have to fine-tune tolerances depending on your filament. The first few uses of the box require a tiny bit of force, but it should be way easier after a few times.
I've included two versions for the lid - one with just a single color and one for multicolor printing. I've also attached pre-sliced files for the MK4 and manual filament changes. As always - triple check everything carefully before using gcode of other people.