1 / 1
Beautiful filament rack shelf remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple filament rack that requires two dowel sections.
- Rating
- 4.6 / 5
- Likes
- 24
- Downloads
- 117
- Makes
- 4
- Views
- 660
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Simple filament rack. Requires two sections of dowel and four #8/4.5mm screws for installation. I used 1" screws to install it into ¾" plywood.
I've included the f3d file in case you want to adjust the dowel diameter. This is for spools of diameter 20mm, but that can also be modified in the design.
Designed to be printed at 0.2mm layer height. I printed with 20% infill and 4 perimeters.