Silicone Groove Ring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mold to make a 7.5mm wide men's ring with a stepped band and curved faces. Grooves on the inside let your skin breathe.
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 82
- Makes
- 0
- Views
- 749
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Men
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with 0.2mm nozzle and 0.1mm layer heights. Random seam worked well for me.
Pour silicone slowly into one side of the top slot so air can flow out the other side until the entire mold is filled. Stir through the slot with a sewing needle to make sure all air pockets are removed then completely fill the top reservoir.
When the silicone is cured you can simply squeeze the mold to crack it apart. Crack the outer reservoir wall from the mold first then run a sharp knife around the crack. This gives you a clean cutting guide to separate your ring from the extra silicone in the reservoir. Squeeze the mold more until the inner wall of the mold can be folded and pulled away, releasing your silicone ring.
10 = 19.8mm ID
11 = 20.6mm ID
12 = 21.3mm ID
13 = 22.2mm ID
14 = 23.4mm ID
15 = 24.4mm ID
