Ender 3 HeroMe v5 direct drive adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter to convert your stock nema motor and extruder to a direct drive for your heroMe printing head.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 49
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
This is an adapter to convert your stock nema motor and extruder to a direct drive for your heroMe printing head.
Since heroMe, especialy gen5 pushes the hotend further out from the carriage, extruder motor clears the frame hence allowing mounting it this way. All of this was done to move center of mass of the motor over the rails and minimize the moment that is created due to motors weight.
Use the original hardware, screws etc. The print must be stiff so i would recommend 40% or more infill with 4+ walls. BEWARE you will still need a part of bowden tube to connect extruder to the hot end. Bouth fittings from both parts should fit inbetween.
this couild work for other herome conversions for Ender 3 V1 and V2.