Laser Cutter Engraver Cleaning Station
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.85 – €3.49 net (excluding VAT)
For file: LaserCleaningStationLid-PLA-01h40m-072g.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.17 excluding VAT (range midpoint).
- Weight reported by the author
- 71 g
- Print time reported by the author
- 1.67 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An organizer for supplies needed to clean laser cutter and engraver optics.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is a simple shelf to organize the supplies needed to clean the optics of laser cutters and engravers, including lens cleaning solution, cotton swabs and alcohol prep wipes. Alcohol prep wipes may not be compatible with some coated optics and alcohol should not be used on acrylics but isopropyl alcohol is good for removing oils as well as resinous debris from condensed wood smoke or other laser cutting byproducts.
Two mounting screws are required for mounting to a vertical surface, or the base station can be used on a horizontal surface.
The lens cleaning recess is designed for 8 ounce bottles of Zeiss lens cleaning solution, Amazon ASIN B00GPVQVCO.
A lid is provided for the cotton swab container because it is essential that only clean swabs are used to avoid scratching delicate laser optics, where even a small scratch will result in a catastrophic failure when powerful laser light is applied. Do not allow abrasive dust from laser cutting to contaminate any of the laser cleaning supplies.
The rectangular bin at the right is sized for alcohol prep pads but can also be used to store small tools or spare parts used when cleaning or maintaining a laser cutter/engraver, such as spare lenses or mirrors, air assist nozzles, etc.
The FreeCAD FCStd file is provided so the part can be modified to personalize its use.
G code is provided for the cleaning station and the lid. Both easily fit on most printers but were sliced to print at 200 mm/s on an Elegoo Neptune 4 printer. If your printer can't print PLA at that speed it may be possible to apply a universal speed reduction to halve the speed for pre-Klipper 3D printers.