Toyota TEQ rising sun lightbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Toyota TEQ lightbox featuring a Japanese rising sun
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 74
- Makes
- 0
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Toyota TEQ LED lightbox with the Japanese rising sun is a visually compelling tribute to Toyota enthusiasts, featuring the TEQ logo set against the iconic rising sun backdrop. Enhanced with LED technology, the lightbox showcases intricate details and radiates a dynamic glow. Ideal for display in automotive spaces, it symbolizes a blend of automotive excellence and Japanese heritage, encapsulating the pride associated with the Toyota brand and its commitment to engineering quality.
Materials
Materials and tools required for this project include a glue gun, aluminum tape, and an LED USB strip. Additionally, a soldering iron is optional for those who may choose to use it.
Suggestions
1. Opt for a textured PEI sheet for improved printing results.
2. Utilize the recommended print profile, as it includes several settings conducive to achieving optimal results.
3. Create a hole for the USB strip at your preferred location, using a soldering iron, drill, or by adjusting settings in the slicer.
4. Enhance light diffusion by applying aluminum tape to the inside of the backplate.
5. When placing the LED lights, ensure they are positioned as far away from the colored design as possible to prevent diffusion issues and the visibility of individual LEDs.
Bambu Studio Settings
For optimal results, I highly advise utilizing the provided print profile. However, if you opt not to, here are the key slicer settings recommendations:
1. Navigate to preferences (ctrl + P), activate developer settings, then go to Quality → Advanced → First Layer Flow Ratio: 1.04 to 1.08.
2. Under Quality, choose Wall generator → Arachne.
3. Set Quality → Wall transitioning threshold angle to 50º.
4. In Strength → Advanced, adjust Infill/wall overlap to 20% to 25%.
5. Quality → Advanced → Activate "Avoid crossing walls."
6. To minimize stringing, consider increasing retraction or reducing temperature.
7. When color printing, order the colors from the lightest to the darkest.
Print Settings
0.4mm Nozzle @ .2mm
3 bottom layers
15% gyroid infill on base
First layer speeds, 30mms and 60mms for first layer infill