Theragun Mini Handle Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach a stick to your Theragun Mini to reach your shoulders and back.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 113
- Makes
- 0
- Views
- 1,513
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Share Alike
When my dominant hand got sprained in a fall, I couldn't reach my shoulders and back with the Theragun Mini. I created this adapter that accepts any paint brush, broom or squeegee handle that has a 3/4" 5 TPI ACME threaded tip.
I had to seal the holes due to warp snagging during printing so you'll have to cut the vent, button and indicator light holes manually.
Most of the prototype printed in thin walled PLA stood up. But the PLA latch snapped after a couple days. The PETG version of latch is holding fine so far.
3rd revision is provided for download and incorporates a more simple handle receiver, reinforced lower halves and slightly revised latch area.
Hardware:
Theragun Mini (gen 1)
Carrand 9003R Red 12" Wood Squeegee Handle
- x4 M3 30mm socket screw.
- x4 M3 Nyloc nuts.
- x2 2.9mm Ø 38mm long leftover pop rivet mandrel
- x1 2.9mm Ø 27mm long leftover pop rivet mandrel
Slicer Info (Prototype):
- Filament: PLA
- Perimeter/Ends: 3/3
- Infill: 20%
- Used Filament: 128.82g
- Estimated Printing Time: 9h44m (normal)
Strategic supports required, see images.