Hanger Hook For Curtain Rail
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.35 – €0.42 net (excluding VAT)
For file: Simple_Hook_0.4n_0.2mm_PLA_MK4_28m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.38 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 16.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easy print. No support material is needed. Small hooks for hooking hangers to curtain rails.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 41
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Function
- This small hook allows you to change the direction in which the hangers are hooked by 90 degrees :)
Build info
- It can be printed from PLA.
- It is a simple model, so you can choose other materials.
- Infill is gyroid pattern and should be 15% or more to hang an outer jacket.
- The inner diameter at the top is 30mm and the gap is roughly 14mm.
- I recommend scaling the model depending on the thickness of your curtain rail.
- It worked on the curtain rail in my home that had a horizontal rectangle with a cross section of 10x28mm.
- No support is required.
Others
- I printed at the default setting speed using the Prusa MK4 and it took about 28 minutes
This is my first design to 3D printer!
I am so happy to post this model and join the community !