1 / 15
Snowball maker - compact
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact snowball maker with a hinge. Easy to print and easy to assemble.
- Rating
- 4.93 / 5
- Likes
- 1,286
- Downloads
- 5,508
- Makes
- 80
- Views
- 15,278
- Reviews
- 71
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Compact snowball maker with a hinge. Easy to print and easy to assemble. It has convenient grips to open the mold.
Printing:
I printed this with PLA, 0,2mm layerheight, 3 perimeters, 15% infil. For printing orientation please refer to 3mf file or the video.
Assemble (also see the video):
- Remove parts from the plate.
- Instert Part_B into Part_A.
- Insert bolt.
- Screw on the nut and tighten gently.
- Have fun.
Fine tuning the hinge:
If you will need to fine tune the bolt clearance, just print the bolt and nut again with use of XY scaling! No need to print the main parts again.
Also check out: