Bandsaw Dust Collection - Jet JWBS-14
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dust collection adapter for a late 1990's Jet JWBS-14CS
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 106
- Makes
- 2
- Views
- 1,137
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Update: 3/15/2025
I have added a version of the top part that should have a better fit with the stock blade guides. Although I find the thumb screws on the stock blade guides to cause more trouble than they are worth so I recommend replacing them with set screws. M6x8MM should work amazon example https://a.co/d/23a4lOa
Also if using the stock set up you will have to remove the sheet metal blade guard that is secured under the blade guides.
Hope this Helps.
-----------------------------------------------------------------------------------------------------------
This is a dust collection adapter for a late 1990's Jet JWBS-14CS. The stock dust collection does not do much and I wanted to make a better one.
Attaches to the bandsaw door with the original dust collection screws and 6mm nuts imbedded in bosses on print. 8mm magnets snap the top and bottom together.
The top piece of the part can be removed for angled cuts from 0 to 40 degrees table tilt and the door can be opened for 40-45. I also have the cater blade guides on my saw.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.32
Infill:
10
Filament: Overture PLA Black
How I Designed This ===================
This was designed in Onshape but is quite messy as it was one of first parts made after switching from SolidWorks.
Category: Machine Tools