LEGO Big Santa Sack with Bayonet Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Want your LEGO® Santa to carry some treats or small gifts? Look no further. This is the sack you are looking for.
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 254
- Makes
- 1
- Views
- 1,978
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
Want your LEGO® Big Santa to carry some treats or small gifts for Saint Nicholas Day or for Christmas? Use this remix to store some goodies in Santa's sack. It features a bottom lid with a bayonet lock which can be opened by twisting the lid using a coin (designed for 2€, smaller coins will work as well).
The spacious compartment is 8cm tall and 9cm in diameter, with another 4cm cone on top. The opening is 7.3cm in diameter and reduces the compartment by 0.6cm in height.
Both parts were tested on the MK4 using the 0.20mm SPEED profile. The lid works fine with 10% grid infill and no supports. The sack itself must be printed with supports touching the ground plate and 10% infill as well. Organic supports work best with this design. Feel free to adjust the infill based on your experience. Check out the attached project files for more details.
The tolerances are tight so as to have a firm grip for the bayonet lid. Depending on your printer the lid may be to tight or not be flush with the bottom of the sack. Simply use your slicer to cut a layer from the top or the bottom and reprint the lid.