DIN Rail - top hat rail IEC/EN 60715 – 35 × 7.5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A proof-of-concept 3D printed version of DIN rail
- Rating
- 5 / 5
- Likes
- 57
- Downloads
- 661
- Makes
- 1
- Views
- 2,370
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This print was the result of discussions about the use of DIN rail with 3D printed parts within the following group:
3d Printing for Metalworkers and Model Engineers
Admittedly this print is of limited usefulness for the following reason:
- Actual DIN rail is inexpensive
- Actual DIN rail is metal, and conductivity is a requirement for some applications
- The plastic version is of course not as strong as the metal version
However, this print may be of some use for test purposes, or when small quantities of DIN rail not requiring high strength are needed.
The prints provided here are all based on an initial “unit” of rail 25mm in length, with additional lengths based on multiples of this unit.
The OnShape 3D CAD files for this are here :
Print Instructions
Print in PLA using the 3mf files provided; note that a brim is required for adequate bed adhesion.
In order to print with no supports, and with the filament in the ideal orientation, the rails are printed “end down.” I was frankly surprised that this worked well even with the “8 unit” print fully 200mm high (see photos).