Dancing Hearts Pendant
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small hearts slide from side to side when this print-in-place heart pendant moves. Especially pretty in two colors.
- Rating
- 5 / 5
- Likes
- 109
- Downloads
- 232
- Makes
- 6
- Views
- 849
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
Works best on a printer with good resolution to allow the hearts to slide freely when printed. Mine slide right away once the brim is removed. I printed the pendant at 0.2 mm layer height with an outer brim to keep the small pieces in place. I set the fill pattern to “concentric” for the top and bottom layers. A color change in the last two layers (0.4mm) gives the small hearts and the large heart outline a nice “pop” of color.
Update: Just added a 50% scale version (TinyDancingHeartsPendant.stl) that will be tricky to print, but worked for me with the following settings:
- 0.08mm layer height
- inner and outer brim - with 1mm brim width
- concentric fill pattern for top/bottom layers