Remotec - ZRC90 Remote - Label Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Z-Wave - ZRC90, 8-Button remote, labels
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The sticky labels that came with the remote are:
By far too small and the once you need are not there :-(
…and I can not always remember which button does what :-)
I could not find any other solution,
so here is my idea.
Prints with out any supports.
Main Carrier- Part 1 and 2 are to be glued
The lower Button carrier is at an angle.
(There are some pins, for easy alignment)
The assembly fits right behind the original remote holder.
Can be glued or not to the original holder.
Uses 16x magnets for the label carriers,
OD=6, height ~2.8-3mm
Labels can be changed (of course)
and
the “label carriers” can be placed at any position.
…. as programming changes :-)
Use the Fusion360 file to make your own labels!
Label carriers can also be changed to round or hexagon, or whatever comes to mind?
Just use the key, from the carrier for easy orientation.
I did not use any glue for the magnets - but if you need it…
…and make sure they are all in the same direction, before glueing!
The labels fit in very snugly, I did NOT need glue here…
Printing material and colours: What ever you like :-)
I printed some labels:
Base: Glow in the dark
+
Text & graphics: Black
Fusion360 files included:
1 for the carrier and 1 for the labels
cheers