1 / 2
Adjustable Bottle Cutter PET REMIX (more overlapping of the bearings)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed version with the bearings closer to each other (-1.00 mm).
- Rating
- 4.5 / 5
- Likes
- 25
- Downloads
- 247
- Makes
- 2
- Views
- 1,450
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A bottle cutter that uses 608ZZ skateboard bearings (8x22x7mm), and 19.2mm metal disks to adjust the height.
BOOM:
2 X 608 one face grinded bearings (8x22x7mm) (I used basic sanding paper (80) and lots of patience to grind both bearings.)
2 X M8 Bots (I used 36mm long ones)
2 X M8 Nuts
1 X spacer for the upper bearing (I added a selection of them) if none fit, just chose a thicker one and just sand it down to size.
Any metal disk with a diameter less than 19.2mm will work (I used 5 bani romanian coins).