1 / 3
AWD klicky mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Klicky mount, moved back to not collide with the hotend. Primarely designed for the MagicPhoenix AWD toolhead mount
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Printing
Settings:
- 0.2 layer heigh
- outer lines first (because of the small cable channels)
- in case of using supports i recommend to use custom supports since otherwise it will be a hard/impossible task to clean the holes
Assembly
Just same as the original klicky mount only that you run the cables trough the holes.
- The holes where made for 1mm thick cables
Tipps
- If you use MPX AWD you might need the high adjustable klicky mount or the +4.5mm verision for it to match up with the back mount.
Credits
Printed in Polymaker black ASA
Designed in Autodesk Fusion 360 CAD software with the free hobbyist license (2023 December Build)
MagicPhoenix AWD:https://magicphoenix.xyz/product/voron-2-4-9mm-ab-2wd-awd-cnc-kit/