Brymen BM869s 2020 30 Degree Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 30-degree angled meter mount to attach to 2020 aluminum.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Often my meter is needed but it takes up valuable desk space. I have 2020 shelving to hold my test equipment. Using a higher shelve, I can put my meter out of the way. By putting a 30-degree angle I can tilt it down to get a better viewing angle. Also, this mount can be used to get a better viewing angle if I lay it flat on my desk.
I added a back pocket as a place to hold test leads.
Note it takes long M4 bolts and washers to adjust it such that if fits properly in the 2020 slots. Normally the T nuts are M5. I did not have any long M5 bolts, so I used the long M4 bolts that I had on hand.