Simple garden spike
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple garden spike to write the name of the plant/vegetable on.
- Rating
- 4.833 / 5
- Likes
- 65
- Downloads
- 582
- Makes
- 6
- Views
- 1,784
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
A simple, yet effective garden spike to write the name of the plant on.
I found that 1.2mm is a good width to make the spikes strong, yet flexible. Adjust as you like.
You can print about 10 spikes in 1:20 with a layer hight of 0.20mm.
Make sure to print it in PET-G to make sure the sun has a minimal effect on the plastic, PLA might become brittle over time. Also print it in a bright color to make it easy to spot, this will also prevent you from losing the plastic pieces in your garden.
Let me know if you want other dimensions or if you have any other suggestions and I see what I can do.
Some people have asked me for a Paypal donation link: paypal.me/jahtimojah
Print instructions
Print with your own settings to get a reference chart that compares to your printer.
My prints are printed with a 0.4mm nozzle and 0.32mm layer height.