Honeywell Redlink Internet Gateway 10in rack mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.56 – €5.58 net (excluding VAT)
For file: Honeywell-Redlink-Gateway_0.6n_0.3mm_PLA_MK3S_3h33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.07 excluding VAT (range midpoint).
- Weight reported by the author
- 95 g
- Print time reported by the author
- 3.56 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This will allow you to mount a Honeywell Redlink gateway in a 10" network rack for your home thermostat.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 386
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a 10" mini rack mount with optional retention features. You can use the keyholes on the bottom of the device with M3 button cap screws, or the retention clip with a M2x8 button cap screw and M2 square nut, or both.
Possible future modifications would be to add a keystone jack mount to allow for a short cable run on the face.
The Honeywell Redlink doesn't generate heat nor is it heavy.
UPDATE (07DEC23): Forgot to trim excess off the bottom of the retention clip. Resized opening for the Redlink from 93.5mm wide to 92mm wide.
UPDATE (02DEC23): Test print from attached .3mf file in Prusament PLA