1 / 7
Hood Details for 3DSets RC Jeep Rancher (Wrangler) — image 1
1 / 7

Hood Details for 3DSets RC Jeep Rancher (Wrangler)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Some parts to add to your Rancher's hood

Rating
5 / 5
Likes
18
Downloads
98
Makes
1
Views
692
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

I wanted to add some more details to my model, so here's what you'll find:

-Hood Flap: This is the hardest part to print, I failed a lot of prints before make it. Print it slow with raft and support, 100%infill and 0,1 layer. In the pictures you can find the right orientaion for print it.

-Hood handle: This is very small, print it with slow settings and glue it to the hood (measure before!)

-Hood tips: Measure, drill 2 holes on the hood, and use 2x M2x4mm screws to fix them.

-Hood Latches: Print them with slow settings and raft, find the best orientation on the bed. Measure, drill 4 holes, and use 4x M2x4mm screws to fix them on the hood.

-Mirror Glass: This is probably the easier part to print, I used silver PLA.

DISCLAIMER: Those aren't easy parts to print, please make sure that your printer is very well calibrated and take your time to edit your slicer to make good prints!

 

Tags