1 / 6
Tenon Wedge Hammer Joint Test
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
When I saw the laser cut “hammer joint” shown in the reference, I just knew I had to try it as a 3D print, so I created this test version in PLA.
Assembly
Assembly of the joint is straightforward : Place the hole in the Top piece over the tenon until it seats fully, then tap the tenon wedge down flush ( a “soft” hammer is recomended).
Print Instructions
Print in PLA using the 3mf file provided; otherwise :
- 2 perimeters
- 15% gyroid infill
CAD
The OnShape 3D CAD files for this are here :