Star of David Tree Topper
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€18.11 – €22.14 net (excluding VAT)
For file: star of david tree topper_0.3mm_PLA_MK3_18h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €20.12 excluding VAT (range midpoint).
- Weight reported by the author
- 292 g
- Print time reported by the author
- 18.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
✝ 🤝 ✡ Equal opportunity atheism
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 61
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Share Alike
This design uses up to two M3 threaded bolts to secure to the tree. I sized it for my tree with a 0.29 inch ID collar.
Prints cleanly with organic supports, you really just need to support the two sections of flats at the bottom of the part and to the top. I've chamfered these faces to reduce the low angle overhangs. See photos for my print setup.
I've included the .SLDPRT if you have access to Solidworks, and if so feel free to remix and redesign to your heart's content.