1 / 4
Tiny Winter Village Lantern
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small winter village on top of a lantern for tea lights!
- Rating
- 4.941 / 5
- Likes
- 194
- Downloads
- 996
- Makes
- 20
- Views
- 3,147
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I modeled a small winter village for a lantern lit with tea lights. To create the model please follow the steps below:
- Print the top. This can be printed at 0.2 mm layer height with no supports. I would recommend printing in PLA at a low temperature to prevent stringing. I used 190 degrees C for the first layer and 185 degrees C for all other layers in HATCHBOX PLA filament.
- Print the base. I recommend 0.3 mm layer height.
- Glue the top to the base.
This model was printed on an Anycubic Mega Zero 2.0 with a 0.4 mm nozzle in HATCHBOX PLA filament.