zx82net leaping arch box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed zx82net box for my leaping arch yard decorations. Holds power supply and controller. Fits 1-inch PEX tubing.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Box to hold electronics for a “leaping arch” holiday yard decoration. Based on the zx82net box, I've added a “post” over which 1-inch PEX tubing slides. The model also includes the “tail” end for the other end of the tube. The PEX fits a little loosely, but I sealed it with some silicone caulk to help keep water out and the ends secure.
The box is big enough to fit a 5v power supply and a small microcontroller, such as an ESP8266 or ESP32. In my setup, I use RGB pixel LEDs which I drive off an ESP32. I added some foam padding to keep things from rattling around inside the box.
My modified version also adds a hole that fits a standard cable gland. I run the power cord through the gland.
Print in PETG or another durable filament. You'll need the cams, clips, and hinges from the original model.