BDsensor mount for Voron v0.2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a BDsensor mount for Voron v0.2 minified miniSB with sherpa mini mount.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 0
- Views
- 570
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
It's a BDsensor mount for Voron v0.2 minified miniSB with sherpa mini mount.
Remix from MiniSB-Extruder-Mounts.
Required hardware:
a M2 self tap screw 10mm, longer is ok.
a tiny zip tie, optional, for guide the cable between sensor and chip case.
Use BDsensor_offset.stl to tune sensor height, use slicer Z scale function to get the height you want, and put the printed offset between sensor and mount.
For reference my setup is use 1mm offset, its possible different for different bed.
Chip case uses friction mount, not completly fixed, it may slide off if you running brutal printing speed.
BDSensor_old.stl is a old design, it doesn't has chip case mount.