2023 Vase Mode Ornaments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are ornaments to be printed in vase mode. All use a 3/4" or 20mm ornament top.
- Rating
- 5 / 5
- Likes
- 99
- Downloads
- 355
- Makes
- 5
- Views
- 1,425
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
These are a selection of vase mode Christmas ornaments I designed. They all use a ¾" or 20mm ornament top.
I'd suggest printing them with 6-8 solid bottom layers. The “Star” and “ZigZag” ornaments are challenging prints that need decent cooling and benefit from a .6 or .8mm nozzle with a larger extrusion width. Use lots of cooling on them and print them with a brim. The other ones can be printed more easily and need much less cooling. If you use less fan, you can get away with no brim. When printed on my Mk3, I still used a brim. When printed on my RatRig (CoreXY) with a stationary print bed, the brim was optional unless using a high fan.