E3D Roto V0 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple Voron V0 mount for the E3D Roto
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 54
- Makes
- 0
- Views
- 986
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This is a mount for the E3D Roto on a V0 printer! It's a modified version of the mini stealth burner mount.
Print Settings:
I recommend using organic supports just in the area that holds the belts. I printed with CookieCad PETG with 40% infill.
Required hardware:
- E3D Roto
- 2x M3x10
- 4x M3 Headset Inserts
Other modifications:
You will need to move the Z rails and possibly cable chain up to allow the bed to get close enough to the nozzle.
Assembly:
Remove the 3d printed metal heatsink from the Roto and use the two M3x10 screws to attach the stepper to the x carriage. After this attach, the heatsink onto the stepper following E3D's instructions. When attaching the heatsink make sure the belts stay out of the way!
Note:
You do loose a bit of build area, especially if you want to keep the door closed to the printer. The next thing I will design is a good part cooling solution to prevent it from taking up to much room. I may also try to modify the mount a bit more to reduce the loss of build area even more.