1 / 7
Creality K1 squach ball foot (no bottom panel)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printer feet with squash ball damping for Creality K1 without lower cover plate.
- Rating
- 4 / 5
- Likes
- 21
- Downloads
- 104
- Makes
- 1
- Views
- 774
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Printer feet with squash ball damping for Creality K1. Should also fit K1 Max.
This model is suitable for the Henlor great mod (K1 motherboard cover), which requires removal of the protective plate on the underside of the printer.
Squash ball damping significantly reduces vibrations and VFA problems.
Printing tips :
- Layer height: 0.2mm
- Wall loops : 3
- Bottom shell layers: 5
- Top shell layers : 4
- Sparse infill density : 15%
- Supports enabled : normal (auto)
- Support threshold angle : 30°
Filament type :
- META PLA or Hyper PLA (I think PETG can be damaged if screws are too tight).
Material :
- 4 M3 × 12 mm Hex Socket Cap screws (to replace the stock ones).
Personally, I've chosen squash balls with one yellow dot, but you're free to adapt them to your own taste.